Predator V2 - 2.2m (90in) Composite Jet

  Click On Images to Enlarge

Overview

A whole new line of sport jet, designed from the ground up with performance in mind. Capable of both high and low speed flying and maneuvers and even options for converting to full 3D no maneuver is out of reach for the Predator.

Select one of the several aggressive colour schemes and really stand out from the crowd at your next event.

Specifications:

Model:	Predator 2.2
Wingspan:	81.7in (2.076m)
Length:	90in (2.286m)
Wing area:	1,292sq in (8,332sq cm)
Weight:	23.7lbs (10.2kg)

Features:

• Full composite construction, lightweight and strong
• Two piece wing and two piece stabiliser all for easy transport
• Painted outside the mold so no seam lines
• Pre-installed tubes for servo extension leads
• Optional 3D vector thrust pipe
• Quick Release system on stab and wing
• New Tray Equipment
• 1kg lighter than previous version

Included Hardware:

• Complete air frame (including aluminium wing-tubes and fibreglass control horns)
• Pilot-RC electric retracts and electric brakes
• Servo extension leads
• Dual wall tail pipe (105mm diameter – for 80-300N turbines)
• 3.7L Fuel Bag
• Pre-prepared pushrods with ball links

Required Hardware (Not Supplied):

Turbine Size:

• 80-160N for normal sport flying
• 180-260N for 3D vector flight – Avoid high speed high G flying

Servos: 8 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

Pilot-RC Recommended Hardware (Not Supplied):

Servos: Pilot-RC PW28AH (28Kg – 0.056s at 8.4v)

Servo arms: Pilot-RC 1.2in Aluminium arms (included with Pilot-RC servos)

Pilot-RC Wingbags (PIL)

Photo Gallery

 

Colour Schemes Available:

Scheme 28

Scheme 29

Scheme 30

Scheme 31

Scheme 32

Build Manual

Aileron: 17mm, Rudder: 25mm, Elevator: 13mm.

Flap: 46mm for take off and 78mm for landing.

The CG is 275-283mm from the front leading edge on the root of the wing

Complete build manual can be downloaded here - http://pilot-rc.com/Downloads/Predator220M.pdf

Manuals/Downloads

• Predator 2.2m Build Manual